Products
Microscope camera Imaging Modules
CMOS Imaging Modules CCD Color Imaging Modules Sensitive CCD Imaging Modules
Software Camera drivers

CMOS Imaging Modules

CMOS-Module-with-C-Mount.jpg
Image 1 of 2
CMOS Imaging Module
Here you can download the datasheet
The high performance board level cameras with CMOS Technology provide the best imaging solution for system integrators in industry, medicine and security.

Easy to integrate

  • Software development kit (SDK)
  • WIN/ MAC/ Linux
  • LabView driver
  • ActiveX Control
  • USB 2.0 or IEEE 1394a FireWire interface
  • Available with or without C-Mount


The following Imaging Modules are available:

  • Imaging Module 1.3C USB (color, with or without C-Mount)
  • Imaging Module 1.3M USB (monochrome, with or without C-Mount)
  • Imaging Module 3.15C (FireWire, color, with or without C-Mount)
  • Imaging Module 3.15C USB (USB, color, with or without C-Mount)
  • Imaging Module 5C USB (color, with or without C-Mount)
  • Imaging Module 5M USB (monochrome, with or without C-Mount)


Benefits

  • Very high frame rates
  • Region Of Interest (ROI)
  • High resolution
  • Low noise electronics
  • Binning
  • Dynamic grey scale leveling

Technical Data Imaging Module 1.3 USB

Image sensor 1/2" CMOS
Sensor type Micron MT9M001
Sensor size [H x V] 6.66 mm x 5.32 mm
Active pixels [H x V] 1.280 x 1.024 pixel
Digitization 10 bit
Color/ Monochrome Color/ Monochrome
Sensor resolution 1280 × 1024 pixel [1.3 Mpix]
Pixel size 5.2 µm × 5.2 µm
Pixel clock 48 MHz
ROI Arbitrary position and size
Dynamic range 68 dB
Read out noise [typical] < 1 LSB @ 10 bit transfer mode
Exposure times 60 µs … 0.5s
Analogue gain 1x … 8x
Max. frame rate [image size] 30 fps [1280 x 1024]
Max. frame rate [typical via USB2.0] 20.5 fps [1280 x 1024]
Binning No
Cooling No
Digital Interface USB 2.0
Optical connection C-Mount (0.5× TV pref.)
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm]
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply USB powered
Power consumption approx. 2 W
Dimensions sensor board 51 mm x 51 mm [with C-Mount]
Dimensions interface board 55 mm x 46 mm
Cable length [sensor board to interface board] 77 mm
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight approx. 220 g [with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a

Technical Data Imaging Module 3.15 USB/ 3.15

Image sensor 1/2" CMOS
Sensor type Micron MT9T001
Sensor size [H x V] 6.55 mm x 4.92 mm
Active pixels [H x V] 2.048 x 1.536 pixel
Digitization 10 bit
Color/ Monochrome Color
Sensor resolution 2048 × 1536 pixel [3.15 Mpix]
Pixel size 3.2 µm × 3.2 µm
Pixel clock 48 MHz [USB] | 36 MHz [FireWire]
ROI Arbitrary position and size
Dynamic range 58 dB
Read out noise [typical] < 1 LSB @ 10 bit transfer mode
Exposure times 50 µs … 3s
Analogue gain 1x … 8x
Max. frame rate [image size] 12 fps [2048 x 1536]
Max. frame rate [typical via USB2.0] 8.9 fps [2048 x 1536]
Binning 2x, 3x
Cooling No
Digital Interface USB 2.0 | IEEE1394a FireWire
Optical connection C-Mount (0.5× TV pref.)
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm]
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply USB | FireWire powered
Power consumption approx. 1.9 W | 4 W
Dimensions sensor board 51 mm x 51 mm [with C-Mount]
Dimensions interface board 55 mm x 46 mm [USB] | 70 mm x 75 mm [FireWire]
Cable length [sensor board to interface board] 77 mm [USB] | 127 mm [FireWire]
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight approx. 220 g [with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a

Technical Data Imaging Module 5.0 USB

Image sensor 1/2.5" CMOS
Sensor type Micron MT9P001
Sensor size [H x V] 5.70 mm x 4.28 mm
Active pixels [H x V] 2.592 x 1.944 pixel
Digitization 12 bit
Color/ Monochrome Color/ Monochrome
Sensor resolution 2.592 x 1.944 pixel [5.0 Mpix]
Pixel size 2.2 µm × 2.2 µm
Pixel clock 48 MHz
ROI Arbitrary position and size
Dynamic range 68 dB
Read out noise [typical] < 4 LSB @ 12 bit transfer mode
Exposure times 75 µs … 3s
Analogue gain 1x … 8x
Max. frame rate [image size] 9 fps [2.592 x 1.944]
Max. frame rate [typical via USB2.0] 5.7 fps [2.592 x 1.944]
Binning 2x, 3x
Cooling No
Digital Interface USB 2.0
Optical connection C-Mount (0.5× TV pref.)
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm]
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply USB powered
Power consumption approx. 1.8 W
Dimensions sensor board 51 mm x 51 mm [with C-Mount]
Dimensions interface board 55 mm x 46 mm
Cable length [sensor board to interface board] 77 mm
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight approx. 220 g [with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a