Imaging Modul 3.15 CMOS Imaging Module 3.3 Imaging Module 5.0 Imaging Module 1.4C Imaging Module 1.4Ccool Imaging Module 1.4M Imaging Module 1.4Mcool Imaging Modul 11C / 11M ProgRes® CT3 ProgRes® C3 ProgRes® C5 ProgRes® C7 ProgRes® CF ProgRes® CFcool ProgRes® CFscan ProgRes® C14plus ProgRes® MF ProgRes® MFcool ProgRes® MFscan

Imaging Module 1.4Mcool

CF-MF-cool-Modul.jpg
Imaging Module 1.4Mcool
Here you find the data sheet
Best-suited for fluorescence applications:
high light sensitivity and fast live image
Imaging Module 1.4Mcool generate monochrome images with 1.4MPixel resolution and a bit depth of 14Bit. As sensor, a monochrome progressive-scan CCD sensor in 2/3 inch format is used. Excellent electronics with analogue gain supports the high light sensitivity and provide a wide dynamic range. The Imaging Modules consist of two separate board, which are connected via a flat-ribbon cable. This allows to position heat generating components far away from the sensor which is very positive for the image quality.


Cooling and sensor capsule
The cooling of the sensor is done by a peltier element, which transfers the heat to a heat sink. The CCD sensor itself is surrounded by a hermetically sealed capsule, which is nitrogen flushed. This monochrome camera can expose up to 5 minutes and offers very low-noise images.

Easy to integrate
The two-baord-solution is very flexible to integrate. The optical interface is C-Mount, where the IR-cut-off filter (optionally: clear glas) is integrated and which seals the hermetical capsule. The mounting via the C-Mount-mechanics is easy and precise.

Easy communication
The powerful industrial standard interface IEEE1394a Firewire and Trigger connections guarantee a fast communication with computer and other system components.

Software Development Kit
The Imaging Module are integrated into application software by using a free-of-charge Software Development Kit. In the SDK there is a standard C-interface, a comprehensive sample program in source code and an ActiveX Control included. So you have full access to camera and data.

Technical Data

CF-MF-cool-Modul.jpg
Imaging Module 1.4Mcool
Image sensor 1,4 Megapixel CCD, monochrom, 2/3"
Active area 8,8 mm × 6,6 mm
Sensor resolution 1360 × 1024 Pixel
Pixel size 6,45 μm × 6,45 μm
Digitazation 12 Bit
Pixel clock 12 MHz / 24,5MHz
Dynamic range 67 dB / 65 dB (at 10 ms)
Max. exposure time 180 s
Max. frame rate 32 fps (680 × 512)
Image resoltuion 1360 × 1024
HFRM 680 × 512 and 340 x 256
Binning 3x and 5×
cooling Peltier, hermetical sensor capsule
Trigger Input and Output
Digital interface IEEE1394a Firewire
IR-cut-off filter fixed in C-Mount
Optical interface C-Mount
Size sensor board with C-Mount 78 mm × 72 mm
Size interface board 85 mm × 70 mm