Products
Microscope camera Imaging Modules
CMOS Imaging Modules CCD Color Imaging Modules Sensitive CCD Imaging Modules
Software Camera drivers

Sensitive CCD Imaging Modules

IM11-02.jpg
Image 1 of 3
Sensitive CCD Imaging Module
Here you can download the datasheet
Highest sensitivity is provided by excellent low-level noise electronics under use of proved sensor technology.
The sensitive CCD Imaging Modules offer the optimal solution for system integrators requiring highest performance in systems for digital imaging applications, even in Electron Microscopy.

Easy to integrate

  • Software development kit (SDK)
  • WIN/ MAC/ Linux
  • LabView driver
  • ActiveX Control
  • USB 2.0 or IEEE 1394a FireWire interface
  • Available with or without C-Mount


The following Imaging Modules are available:

  • Imaging Module 0.45C (0.45 MP, USB, color, with or without C-Mount)
  • Imaging Module 0.45M (0.45 MP, USB, monochrome, with or without C-Mount)
  • Imaging Module 1.4C (1.4 MP, FireWire or USB, color, with or without C-Mount)
  • Imaging Module 1.4M (1.4 MP, FireWire or USB, monochrome, with or without C-Mount)
  • Imaging Module 1.4Ccool (1.4 MP, FireWire, thermoelectrically cooled, color, with or without C-Mount)
  • Imaging Module 1.4Mcool (1.4 MP, FireWire, thermoelectrically cooled, monochrome, with or without C-Mount)
  • Imaging Module 11C (11 MP, IEEE1394 a or IEEE1394 b, color)
  • Imaging Module 11M (11 MP, IEEE1394 a or IEEE1394 b, monochrome)


Benefits

  • Large pixels for high sensitivity
  • High quantum efficiency
  • Region Of Interest (ROI)
  • IR imaging capability
  • Binning
  • Advanced cooling
  • Dynamic grey scale leveling
  • Overlapping readout

Technical Data Imaging Module 1.4C | 1.4M

Image sensor 2/3" CCD progressive scan
Sensor type Sony ICX285
Sensor size [H x V] 8.8 mm x 6.6 mm
Active pixels [H x V] 1.360 x 1.024 pixel
Digitization 12 bit
Color/ Monochrome Color/ Monochrome
Sensor resolution 1.360 x 1.024 pixel [1.4 Mpix]
Pixel size 6.45 µm × 6.45 µm
Pixel clock 12 MHz | 24.5 MHz
ROI Arbitrary position and size
Dynamic range 65 dB ... 67dB
Read out noise [typical] ~4 LSB @ 12bit transfer
Exposure times 200 µs … 180s
Analogue gain 1x … 8x
Max. frame rate [USB, image size] 15 fps [1.360 x 1.024]
Binning 2x ... 5x
Cooling No
Digital Interface USB 2.0 | IEEE1394a FireWire
Optical connection C-Mount (0.63× TV pref.)
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm], Optional: clear glass
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply USB/ FireWire powered
Power consumption <2.5 W | 6 W
Dimensions sensor board 51 mm x 51 mm [USB, with C-Mount]; 72 x 62.3 mm [FireWire, with C-Mount]
Dimensions interface board 55 mm x 46 mm [USB]; 85 mm x 70 mm [FireWire]
Cable length [sensor board to interface board] 77 mm | 127 mm
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight 220 g [USB, with C-Mount]; 300 g [FireWire, with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a

Technical Data Imaging Module 1.4Ccool | 1.4Mcool

Image sensor 2/3" CCD progressive scan
Sensor type Sony ICX285
Sensor size [H x V] 8.8 mm x 6.6 mm
Active pixels [H x V] 1.360 x 1.024 pixel
Digitization 14 bit
Color/ Monochrome Color/ Monochrome
Sensor resolution 1.360 x 1.024 pixel [1.4 Mpix]
Pixel size 6.45 µm × 6.45 µm
Pixel clock 12 MHz | 24.5 MHz
ROI Arbitrary position and size
Dynamic range 67 dB ... 69dB
Read out noise [typical] ~4 LSB @ 14bit transfer
Exposure times 200 µs … 300s
Analogue gain 1x … 8x
Max. frame rate [image size] 13 fps [1.360 x 1.024]
Binning 2x ... 5x
Cooling Yes
Digital Interface IEEE1394a FireWire
Optical connection C-Mount (0.63× TV pref.)
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm], Optional: clear glass
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply FireWire powered
Power consumption <2.5 W | 6 W
Dimensions sensor board 78 mm x 72 mm [with C-Mount]
Dimensions interface board 85 mm x 70 mm [FireWire]
Cable length [sensor board to interface board] 127 mm
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight 450 g [with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a

Technical Data Imaging Module 11C | 11M

Image sensor Interline progressive scan CCD
Sensor type Kodak KAI-11002
Sensor size [H x V] 36.07 mm x 24.05 mm "35 mm format"
Active pixels [H x V] 4.008 x 2.672 pixel
Digitization 14 bit
Color/ Monochrome Color/ Monochrome
Sensor resolution 4.008 x 2.672 [11 Mpix]
Pixel size 9 µm × 9 µm
Pixel clock 12 MHz | 24 MHz
ROI Arbitrary position and size
Dynamic range 64 dB
Read out noise [typical] 3 LSB @ 14bit transfer
Exposure times 120 µs … 50 min
Analogue gain 1x … 8x
Max. frame rate [USB, image size] 4 fps [4.008 x 2.672]
Binning 2x ... 8x
Cooling No
Digital Interface IEEE1394 a or IEEE1394 b
Optical connection F-Mount
IR cut-off filter HOYA CM500 S [IR cut-off @ 650nm]
Trigger in/ out Synchronization with external devices; configurable via control software
Voltage supply FireWire powered
Power consumption approx. 8 W
Dimensions sensor board 60 mm x 44 mm x 30 mm
Dimensions interface board 108 mm x 60 mm x 50 mm
Cable length [sensor board to interface board] 120 mm
Ambient conditions Temperature: +5 °C ... +55 °C / Humidity: 5 % ... 80 %, not condensing
Stock conditions Temperature: -20 ... +70 °C
Weight approx. 400 g [with C-Mount]
Software Software Development Kit (SDK) [PC/ MAC/ Linux], ActiveX Control, LabView
Hardware requirements PC: MS WIN 2000/ XP/ Vista | Mac: OS X 10.4 or higher; 3 GHz CPU, 1 GB RAM, 64 MB graphics, USB 2.0 or Firewire a or b